广州木质防火门大品牌，木质防火门甲级乙级防火门

• 品牌：南粤
• 型号：可定制
• 材质：实木
• 用途：消防防火门
• 门扇数量：单扇
• 耐火性能：A级
• 开启方式：平开
• 开关类型：手动
• 安全等级：A级
• 使用范围：商铺
• 风格：现代
• 加工定制：加工定制
• 颜色：可定制
• 硬度：/
• 抗压强度：/Mpa
• 摆锤冲击量：/kJ/㎡
• 拉伸屈服强度：/Mpa
• 抗风压性能：\
• 弯曲弹性模量：\Mpa
• 水密性：\
• 制作工艺：铸造
• 产地：广州
• 内部填充：防火珍珠岩
• 颜色工艺：烤漆
• 尺寸：根据客户要求

工厂主要产品有：钢质防火门、木质防火门、钢木质防火防盗门、装甲防撬门、豪华不锈钢格栅门、不锈钢玻璃门、实木门、防火玻璃构件、钢质（复合）防火卷帘门、特级防火卷帘门、带红外遥控装置门、车库翻板门、保温门、隔音门等，工厂各类产品均经国家权威部门检测合格并获生产许可证。1) Door frames and doors with thickness greater than 50 mm shall be connected by double tenons. When assembling frames and fans, the mortise grooves should be closely embedded, bonded with glue, and tightened with glue wedges.
Note: In humid areas, water-resistant phenolic resin adhesives should be used for grade I products and semi-water-resistant uroformaldehyde resin adhesives for grade II products.
2) When making plywood doors (including fibreboard doors), the frame and the corrugations must be on the same plane, and the surface layer, the frame and the corrugations should be pressed and cemented. More than two air-permeable holes should be drilled in the Cross Ridge and the risers at the top and bottom to prevent degumming or blocking.
3) The manufacturing quality of doors shall conform to the following provisions:
(1) The surface should be polished or sanded, and there should be no scratches, burrs or hammering marks.
(2) The lines of frames and fans shall conform to the design requirements, and the cutting angles and joints shall be tightly and smoothly aligned.
(3) Small and short plywood doors and plywood or fiberboard doors are not allowed to degum. Plywood is not allowed to penetrate surface veneers and dowels.

(4) The allowable deviation of door fabrication shall comply with Table 5.1-1.

广州市白云南粤防火门有限公司是专业研制和生产防火防盗系列产品的厂家，中国消防协会和广东省消防协会会员单位。工厂自1991年成立以来一直是以市场为主导，与广州市消防科学技术研究所合作。凭借先进的科学技术，过硬的产品质量和完善的售后服务取得了骄人的业绩。承接了广州第一高楼中信广场及众多商厦酒店等，工厂总投资壹千多万元，拥有自己的厂房，现有职工200多人，专业技术人员占20%，其中具有多年本行业经验的高级工程师、工程师15人。大量进口及国产名优设备（如用于钢质门生产的有加拿大进口电脑控制折弯机、无损伤点焊机等，运用于木质门生产有精密推台锯、四面刨等）和一支高素质专业生产技术队伍和售后队伍。