主 要 配 置 名 称Main scheme name | 型 号 & 参 数 Type & Parameter | 数量 |
系统装机容量 System power | 100Kw | |
A．挤出主机 Extruding machine | | 1 |
齿轮箱冷却方式 Gear wheel case | | |
螺杆直径 Diameter of screw | φ120mm | |
长径比 L/D of screw | 24:1 | |
螺杆转速 Speed of screw | 10-55m/min | |
螺杆村材质 Material of screw | 38CrMoAlA氮化处理HV740-940 | |
机筒材质 Material of screw bobbin | 38CrMoAlA氮化处理HV740-940 | |
压力传感器 Hydraulic inductor | | |
螺杆进料式边料组合料斗Screw inputting material style waste mixed hopper | | |
电气中央控制盘Electric equipments middle controlled board | | |
自动调温仪Automatic adjusting temperature instrument | | |
加热区域 Heated scope | 5 | |
加热功率 Heated power | 47Kw | |
加热形式 Heating style | 铸铝加热圈Heating loop of casting Al | |
最大挤出量 Max. Volume of extruding | 100Kg/h | |
主机电机功率Power of main engine | 37Kw | |
B．复合装置 Compound device | | 1 |
硅胶辊直径 Rubber roller | φ200mm | |
冷却钢辊 Steel roller | φ400mm | |
牵引电机功率 Tow engine power | 11Kw | |
冷却方式 Cooling style | 水冷Water cooling | |
接口 Connecting place | 3/4” | |
模头宽度 Width of mold | 1800mm | |
加热区域 Heating scope | 五区 | |
加热形式 Heating style | 铸铝加热板Heating board of casting Al | |
主 要 配 置 名 称Main scheme name | 型 号 & 参 数Type & Parameter | 数量 |
模头夺厚度调节范围Adjusting scope of mold width | 0.1-0.55mm | |
B．切边。打孔，废边吹送装置Cutting side device | | 1 |
切边方式 Cutting side style | 刀片式Knife piece style | |
风机功率Wind machine power | 1.5Kw | |
针盘，针槽Needle check , needle trough | | |
打孔针规格 specification of needle | φ1.4-φ2.5mm | |
C．裁切装置Cutting device | | 1 |
裁切方式Cutting style | 冷切Cold cutting | |
最大裁切长度Max. cutting length | 1200mm | |
D．收卷装置 Winding device | | 1 |
收卷方式 Winding style | 表面卷取Surface winding | |
收卷速度Winding style | 20-80m/min | |
收卷辊直径Diameter of winding bobbin | φ190mm | |
收卷电机功率Winding power | 7.5Kw | |
最大卷径. winding diameter | 1000mm | |
E．放卷装置Putting device | | 1 |
工位数Working place number | 双工位Double working place | |
纠偏方式correcting an error style | 液压纠偏Hydraulic pressure correcting an error | |
F．设备外形尺寸Overall dimension t | 10000×8000×3000mm | |
G．整机重量Weight | 8000Kg | |
