基本参数
- 产品类别 整套门
- 门帘类别 其他
- 门帘材质 其他
- 品牌 怡立特
- 材质 实木复合
- 玻璃类别 钢化玻璃
- 复合材质 其他
- 金属材质 其他
- 木材质 其他
- 开关类型 手动
- 制作工艺 热压
- 特殊用途 洁净
- 使用范围 房间
- 质量等级 优质
- 安全等级 C级
- 水密性 12.2%
- 硬度 10
- 摆锤冲击量 5
- 抗风压性能 好
- 抗压强度 强
- 拉伸屈服强度 220
- 弯曲弹性模量 4
- 风格 现代
- 颜色 定制
- 产地 山东德州
- 是否外贸 是
- 外贸类型 出口
- 门框最大尺寸 300
- 门框板材厚度 20
产品详情
我公司是业用生产医院学校专用门的公司:我们生产的门的特点.1、甲醛含量完全符合标砖,是山东省质量监督检验局抽检合格产品。2、无菌经过无菌检验完全合格.3、耐磨经过试验合格。4、阻燃有火焰烧不会损坏漆膜。4、耐冲击用摆锤冲击不会损坏。5、门扇高温定型永远不会开裂变心。6、耐候性能好适合世界各地的气候。
1)、的胶合工艺。用180吨热压机,加温到100左右保温保压30-40分钟完成门扇的胶合。有毒物质也会随着温度的升高进行游离。
(2)、高温胶,胶合。我们采用自己经过反复摸索配制的高温胶进行胶合。
(3)、门扇胶合完成后在高温的情况下从热压机取出,冷却到常温后再进行下道工序,这时门扇如果不变形以后也不会再变形。
(4)、防变型钢管。为了更大把握的防止门扇再冷却时变形,我们加了两跟优质防变形钢管
。
(5)、防潮工艺:我们在门扇的封边过程克服了门扇上下头封边转印的难题整体封边和转印。我们选用的门扇面板要求的质量达到标准。
(6)、门扇美化工艺。为了保证门扇的表面质量,我们增加了包装前的门扇美化工艺、门扇表面无菌,光洁,无缺陷。
工艺的验证:山东省质检局对我们的产品进行了抽查各项指标全部合格。
用户的需求使我们的努力方向、我们会不断的推出适合不同家庭使用的环保生态门。
产品英文详情介绍
Our company is dedicated door industry with the production company Hospital School: We produce door features .1, the formaldehyde content in full compliance with standard bricks, Shandong Province Bureau of Quality Supervision, Inspection and sampling of qualified products. 2, sterile sterility test after fully qualified .3, wear after passing the test. 4, burning flame retardant without damaging the film. 4, with the impact resistance Charpy impact will not be damaged. 5, leaf temperature stereotypes never cracking a change of heart. 6, good weathering performance suitable climate around the world. 1), the gluing process. 180 t with a hot press, heated to about 100 pressure and temperature for 30-40 minutes to complete the gluing of the door leaf. Toxic substances will be free with increasing temperature. (2), high-temperature plastic, gluing. We use own through trial and error the preparation of high-temperature plastic glued. (3) After completion of gluing door removed at high temperatures from the hot press, the next process and then cooled to room temperature, after this time, if the door is not deformed will no longer deform. (4), the anti-variant steel. In order to prevent deformation of the door and then cooling greater certainty, we added two anti-deformation with high-quality steel. (5), moisture-proof process: we have overcome the problem as a whole and the transfer door Edge Edge head up and down in the Edge of the transfer process of the door leaf. We use the quality requirements of the door panels up to standard. (6), door beautification process. In order to ensure the quality of the surface of the leaf, we added front door beautification process of packaging, sterile leaf surface, smooth, defect-free. Verification process: Shandong Province food safety of our products were random all the indicators qualified. The user needs to make our direction, we will continue the introduction of environmentally friendly eco-door for different household use.